What I’m asking is, for the 1,500 required flight hours to become a commercial pilot, can those be flown in a single engine, or do they have to be flown in a multi engine?
Noah,
They can be flown in either single or multi but obviously multi engine time is preferred.
-Hannah
Noah,
Everyone talks about the 1500hrs but there’s actually much more to it. In reality is meeting the requirements for an ATP certificate which is the following:
61.159 Aeronautical experience: Airplane category rating.
(a) Except as provided in paragraphs (b), (c), and (d) of this section, a person who is applying for an airline transport pilot certificate with an airplane category and class rating must have at least 1,500 hours of total time as a pilot that includes at least:
(1) 500 hours of cross-country flight time.
(2) 100 hours of night flight time.
(3) 50 hours of flight time in the class of airplane for the rating sought. A maximum of 25 hours of training in a full flight simulator representing the class of airplane for the rating sought may be credited toward the flight time requirement of this paragraph if the training was accomplished as part of an approved training course in parts 121, 135, 141, or 142 of this chapter. A flight training device or aviation training device may not be used to satisfy this requirement.
(4) 75 hours of instrument flight time, in actual or simulated instrument conditions, subject to the following:
(i) Except as provided in paragraph (a)(4)(ii) of this section, an applicant may not receive credit for more than a total of 25 hours of simulated instrument time in a full flight simulator or flight training device.
(ii) A maximum of 50 hours of training in a full flight simulator or flight training device may be credited toward the instrument flight time requirements of paragraph (a)(4) of this section if the training was accomplished in a course conducted by a training center certificated under part 142 of this chapter.
(iii) Training in a full flight simulator or flight training device must be accomplished in a full flight simulator or flight training device, representing an airplane.
(5) 250 hours of flight time in an airplane as a pilot in command, or when serving as a required second in command flightcrew member performing the duties of pilot in command while under the supervision of a pilot in command, or any combination thereof, which includes at least—
(i) 100 hours of cross-country flight time; and
(ii) 25 hours of night flight time.
(6) Not more than 100 hours of the total aeronautical experience requirements of paragraph (a) of this section or §61.160 may be obtained in a full flight simulator or flight training device provided the device represents an airplane and the aeronautical experience was accomplished as part of an approved training course in parts 121, 135, 141, or 142 of this chapter.
1 Like